Wednesday, January 03rd 2018, 08:22:37 AM. Fuse Box Wiring. Posted by Hadrien Gratien
Hit to Read More
Fuse Box Wiring Diagram Location For Jeep Compass
Once you have your fuse tap, the only tools you really need to connect the car radio to the fuse box are a wire crimper tool and a utility knife. If you are installing the radio in a classic vehicle, you'll need a Phillips screwdriver to connect the wire from the radio to the fuse box. Of course, you will also need a fuse rated with an amperage value rated for your car radio. You should be able to find the recommended amperage rating for the fuse in the radio installation guide. Most low-powered radios can use a 20-amp fuse without any issues. However, for high-powered stereos, those that produce 100 watts of power or more. You may have to use a 25- or 30-amp fuse. You may be able to use a wire clasp or harness already under the dash to secure the wiring from the radio to the fuse box. If there is no available clasp or harness, though, you can use some ordinary electrical tape to secure the new power wire for the radio to an existing wire bundles beneath the dashboard. The only other items you might need are a piece of 12-gauge electrical wire and a butt connector if the power wire from the radio is too short to reach the fuse box.
Fuse Box Location 2014 Jeep Wrangler. Fuse Box Jeep Wrangler. Fuse Box Jeep Patriot 2010. Fuse Box Jeep Wrangler 2008. Fuse Box On A 2013 Jeep Patriot. Fuse Box Jeep Wrangler 2014. Interior Fuse Box 2014 Jeep Grand Cherokee. Fuse Box Jeep Commander.
Car2PC - Car Wiring Diagram Gallery
Copyright © 2003 - 2018 Domain Media. All sponsored products, company names, brand names, trademarks and logos arethe property of their respective owners.